Description
John Deere RD35F
Specifications
Manufacturer
John Deere
Model
RD35F
Year
2023
Category
Harvesters
Subcategory
Draper Platforms
Type
Rigid frame flexible cutterbar
Type One
Straight-line knife drive system
Cutterbar vertical flex: 190 mm
(7.5 in)
Knife speed
X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min
Number of slats
Six bat poly
Fingers
Nylon
Height control
Hydraulic
Speed control
Hydraulic
Reel resume
Base
Reel reverse
Base
Operating speeds
6-70 rpm
Speed control One
Hydraulic from cab (side belts only)
Center belt reverse
Base
Number of fingers
21
Auger finger platform
Triple chevron, retracting
Drum/auger reverse
Base
Operating speed
Side belts (variable): 1-3.5 m/s
3.3-11.5 fps
Center belts: 211 m/min
692 fpm
Low-speed center belt (fixed): 4.2 m/s
13.8 fps
High-speed center belt (fixed): 5.1 m/s
16.7 fps
Center cleanout door
Base
Type Two
Electrohydraulic
Header height sensing on the ground
Base
Header height sensing off the ground
Optional: four sensors
Type Three
Optional: hydraulic drive
Operating speed One
Low speed: 200 rpm High speed: 240 rpm
Approximate weight
3485 kg (7683 lb)
Length
10.67 m (35 ft)
Knife drive
Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in
Base skid shoe height
3.8 cm (1.5 in)
Diameter
106.7 cm (42 in)
Reel lift
72 cm (28.3 in)
Reel fore and aft
35.9 cm (14.1 in)
Width
Cross belt: 101.6 cm
40 in
Center belts: 177.8 cm
70 in
Belt depth
101.2 cm (39.8 in)
Cleat height
19.05 mm (0.75 in)
Diameter One
414 mm (16.3 in)
Feed drum fingers
Heavy-duty and round with breakaway notch and retainer Diameter: 16 mm (0.625 in)
Finger reach
152 mm (6 in)
Size
45.7 cm (18 in)
Platform length
11.6 m (38.05 ft)
Overall operating depth
With dividers: 2.74 m (9 ft)
General
One-piece, poly tine pickup reel with 10-in (25-cm) tube
Fore of the cutterbar
40.6 cm (16 in)
Transport width, field position
11.6 m (38.05 ft)
Quick Enquiry
Harvesters John Deere Machines for Sale Flagstaff
Find this John Deere RD35F at Flagstaff Equipment