Description
John Deere HD35R
Specifications
Manufacturer
John Deere
Model
HD35R
Year
2024
Category
Harvesters
Subcategory
Draper Platforms
Length
10.7 m (35 ft)
Knife drive
Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in
Base skid shoe height
3.8 cm (1.5 in)
Diameter
106.7 cm (42 in)
Reel lift
Off the cutterbar: 100.6 cm (39.6 in)
Reel fore and aft
Fore of the cutterbar: 26.4 cm (10.4 in)
Width
Side belts: 4.4 m (14.3 ft) Center belts: 200 cm (79 in)
Belt depth
100 cm (39.8 in)
Cleat height
Cross belt cleat height: 19 mm (0.75 in)
Diameter One
40.6 cm (16 in)
Feed drum fingers
Heavy-duty and round with breakaway notch and retainer Diameter: 16 mm (0.625 in)
Finger reach
152 mm (6 in)
Size
Diameter: 43.2 cm (17 in)
Platform length
11.5 m (37.8 ft)
Overall operating depth
With dividers: 3.2 m (10.6 ft)
Type
Hinged frame flexible cutterbar
Type One
Straight-line knife drive system
Knife speed
X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min
Number of slats
Base: six bat poly Optional: steel tine
Fingers
Base: nylon Optional: steel
Height control
Hydraulic
Speed control
Hydraulic
Reel resume
Base
Reel reverse
Base
Operating speeds
8-70 rpm
Speed control One
Hydraulic from cab (side belts only)
Center belt reverse
Base
Number of fingers
18
Auger finger platform
Triple chevron, retracting
Drum/auger reverse
Base
Operating speed
Low speed: 200 rpm High speed: 240 rpm
Center cleanout door
Base
Type Two
Electrohydraulic
Header height sensing on the ground
Base
Header height sensing off the ground
Base
Type Three
Optional: hydraulic drive 250-350 rpm
Quick Enquiry
Harvesters John Deere Machines for Sale Flagstaff
Find this John Deere HD35R at Flagstaff Equipment