Description
John Deere 730D
Specifications
Manufacturer
John Deere
Model
730D
Year
2024
Category
Harvesters
Subcategory
Draper Platforms
Cutterbar length
9.3 m 30.5 ft
Length
9.14 m 30 ft
Diameter
1.067 m 3.5 ft
Draper belts Width Side belts
1.02 m 3.33 ft
Draper belts Width Center belts
1.4 m 4.583 ft
Platform length
10.0 m 32.9 ft
Overall operating depth
2.5 m 8.2 ft
Transport width, field position
9.9 m 32.5 ft
Transport width on wheel, less dividers
2.7 m 8.9 ft
Transport length, hitch extended
12.3 m 40.4 ft
Reel lift Cylinder stroke
330 mm 13 in
Reel lift Total range
391.5 mm 15.4 in
Reel fore and aft Cylinder stroke
359 mm 14.1 in
Reel fore and aft Total range
620 mm 24.4 in
Cleat height
25.4 mm 1 in
Finger reach
152 mm 6 in
Feed drum fingers Diameter
16 mm 0.625 in
Pickup reel operating speeds
6-45 rpm 137.2-cm (54-in) reel: 5-44 rpm
Platform Type
Rigid draper
Cutterbar Type
Straight-line knife drive system
Knife drive Base
dual knife
Knife speed
490 cycles/min
Cutterbar tilt Base
hydraulic, maximum tilt 9 degree (angle)
Number of slats Base
six bat poly
Fingers Base
nylon
Height control
Hydraulic
Reel resume
Base
Reel reverse
Base
Operating speeds
6-54 rpm
Operating speeds (54-in reel)
5-44 rpm
Draper belts Width Rubber coated polyester with V-Guide tracking
0.7 L 24 oz
Operating speed Side belts
variable up to 223 m/min 735 fpm
Operating speed Center belts
212 m/min 695 fpm
Speed control
Hydraulic from cab
Center belt reverse
Base: center belt not included with SPW configuration
Number of fingers
18
Auger finger platform
Dual chevron, retracting
Drum/auger reverse
Base
Operating speed
195 rpm
Center cleanout door
Base
Header height sensing Type Base
electrohydraulic
Header height sensing on the ground
Base
Header height sensing off the ground
Base
Quick Enquiry
Harvesters John Deere Machines for Sale Flagstaff
Find this John Deere 730D at Flagstaff Equipment