Description
John Deere HDR35
Specifications
Manufacturer
John Deere
Model
HDR35
Year
2024
Category
Harvesters
Subcategory
Draper Platforms
Platform Type
Hinged frame rigid cutterbar
Cutterbar Type
Straight-line knife drive system
S-Series Combine Knife speed
490 cycles/min
X Series Combine Knife speed
520 cycles/min
Pickup reel Reel resume
Base
Pickup reel Reel reverse
Base
Pickup reel Operating speeds
8-70 rpm
Draper belts Center belt reverse
Base
Feed drum Number of fingers
18
Feed drum Auger finger platform
Triple chevron, retracting
Feed drum Drum/auger reverse
Base
Feed drum Operating speed Low speed:
200 rpm
Feed drum Operating High speed:
240 rpm
Feed drum Center cleanout door
Base
Header height sensing on the ground
Base
Header height sensing off the ground
Base
Pickup reel Number of slats
Base: six bat poly Optional: steel tine
Pickup reel Fingers
Base: nylon Optional: steel
Pickup reel Height control
Hydraulic
Pickup reel Speed control
Hydraulic
Draper belts Speed control
Hydraulic from cab (side belts only)
Header height sensing Type
Electrohydraulic
Top auger Type Optional: hydraulic drive
250-350 rpm
Cutterbar Length
10.7 m 35 ft
Cutterbar Knife drive Double-cut, dual-drive, shaft-driven cutterbar:
10.2 cm 4 in
Cutterbar Base skid shoe height
3.8 cm 1.5 in
Pickup reel Diameter
106.7 cm 42 in
Pickup reel Reel lift Off the cutterbar:
100.6 cm 39.6 in
Pickup reel Reel fore and aft Fore of the cutterbar:
26.4 cm 10.4 in
Draper belts Width Side belts
4.4 m 14.3 ft
Draper belts Width Center belts
200 cm 79 in
Draper belts Belt depth
100 cm 39.8 in
Draper belts Cleat height Cross belt cleat height:
19 mm 0.75 in
Feed drum Diameter
40.6 cm 16 in
Feed drum fingers Heavy-duty and round with breakaway notch and retainer Diameter:
16 mm 0.625 in
Feed drum Finger reach
152 mm 6 in
Top auger Size Diameter:
43.2 cm 17 in
Platform length
11.5 m 37.8 ft
Overall operating depth With dividers:
3.2 m 10.6 ft
Quick Enquiry
Harvesters John Deere Machines for Sale Flagstaff
Find this John Deere HDR35 at Flagstaff Equipment