Description
John Deere 9R 440
Specifications
Manufacturer
John Deere
Model
9R 440
Year
2025
Category
Tractors
Subcategory
Tractors
Wheelbase
3912 mm 154 in
Overall length
With front weights, excluding hitch and coupler: 7945 mm 312.8 in With front weights, including hitch and coupler: 8427 mm 331.8 in
Drawbar clearance
Group 48 tires: 527 mm 20.7 in
Inner cab volume
3.27 msup 3 115 cu ft
Cab glass area
6.64 msup 2 71.47 sq ft
Description
JD14 (B20 diesel compatible)
Engine type
In-line six, four valve
Engine family
MJDXL 13.5334
Rated speed
2100 rpm
Aspiration
Single wastegated turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
Cylinders liners
Wet-sleeve
Emission level
Final Tier 4 (FT4)
After treatment type
Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
Displacement
13.6 L 827 cu in
Rated power
324 kW 440 hp
Rated PTO power (hp SAE)
249 kW 335 hp
Power boost
10 percent
Maximum engine power
356 kW 484 hp
Engine peak torque
At 1550 rpm: 2031 Nm 1498 lb-ft
PTO torque rise
38 percent
Transmission Type
John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h 25 mph
Hydraulic system Type
Closed-center, pressure-and-flow compensated
Available flow at a single rear SCV
1.3-cm (1/2-in) couplers: 132 L/min 35 gpm 1.9-cm (3/4-in) couplers: 159 L/min 42 gpm
Number of rear selective control valves (SCVs)
Four to eight factory or field installed Base: four 1.3-cm (1/2-in) couplers
SCV control
Electronic
Hitch category (SAE designation)
Category 4N: 6804 kg 15,000 lb Category 4N: 9072 kg 20,000 lb Category 4N/4: 6804 kg Category 4N/4: 9072 kg
Maximum lift capacity behind lift points
Category 4N/4: 9072 kg 20,000 lb
Sensing type
Electrohydraulic with draft sensing
Drawbar category
Category 4 or Category 5
Rear power take-off (PTO) Type
Independent 44 mm (1.75 in) 20-spline, 1000 rpm
PTO actuation
Electrohydraulic
Rear axle Type
Diameter: 120 x 3048 mm 4.72 x 120 in
Final drive type
Inboard planetary with double-reduction axle
Rear differential lock
Full-locking electrohydraulic
Front axle Type
Diameter: 120 x 3048 mm 4.72 x 120 in
Front axle differential lock
Full-locking electrohydraulic
Turning radius with brakes
Group 48 tires: 6.099 m 20 ft
Battery options
12 V
Total cold cranking amps
3 x 925 CCA Total: 2775 CCA
Seat
Degree of seat swivel, left hand 25 degree (angle),Degree of seat swivel, right hand 40 degree (angle)
Approximate shipping weight, Open;Cab
20,856 kg 45,980 lb
Base machine weight
20,856 kg 45,980 lb
Maximum ballast level
27,216 kg 60,000 lb
Crankcase oil volume
64 L 16.9 US gal
Fuel tank
1514 L 400 US gal
Diesel exhaust fluid (DEF) tank
120 L 31.7 US gal
Cooling system
56.5 L 14.9 US gal
Transmission-hydraulic system
With 3-point hitch and PTO: 227 L60 US gal Without 3-point hitch and PTO: 220 L 58 US gal
Interval for engine oil change
500 hours
Interval for hydraulic/transmission oil change
1500 hours
Interval for engine coolant change
6000 hours
Guidance
Integrated AutoTrac™
Telematic
Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Remote diagnostics
Available with activated JDLink hardware and activations
Quick Enquiry
Tractors John Deere Machines for Sale Flagstaff
Find this John Deere 9R 440 at Flagstaff Equipment