Description
John Deere RDF30
Specifications
Manufacturer
John Deere
Model
RDF30
Year
2026
Category
Harvesters
Subcategory
Draper Platforms
Cutterbar Type Straight-line knife drive system Cutterbar vertical flex:
190 mm 7.5 in
Cutterbar Length
9.14 m 30 ft
Cutterbar Knife drive Double-cut, dual-drive, shaft-driven cutterbar:
10.2 cm 4 in
Cutterbar Base skid shoe height
3.8 cm 1.5 in
Pickup reel Diameter
106.7 cm 42 in
Pickup reel Reel lift
72 cm 28.3 in
Pickup reel Reel fore and aft
35.9 cm 14.1 in
Pickup reel Fore of the cutterbar
40.6 cm 16 in
Draper belts Width Cross belt
101.6 cm 40 in
Draper belts Width Center belts
177.6 cm 70 in
Draper belts Belt depth
101.2 cm 39.8 in
Draper belts Cleat height Cross belt cleat height:
19.05 mm 0.75 in
Feed drum Diameter
414 mm 16.3 in
Feed drum fingers Heavy-duty and round with breakaway notch and retainer Diameter:
16 mm 0.625 in
Feed drum Finger reach
152 mm 6 in
Top auger Size
45.7 cm 18 in
Platform length
10.07 m 33 ft
Overall operating depth With dividers:
2.74 m 9 ft
Transport width, field position
10.07 m 33 ft
Center belt width
70 in (177.8 cm)
Platform Type
Rigid frame flexible cutterbar
S-Series Combine Knife speed
490 cycles/min
X Series Combine Knife speed
520 cycles/min
Pickup reel General One-piece, poly tine pickup reel with
10-in (25- cm ) tube
Pickup reel Reel resume
Base
Pickup reel Reel reverse
Base
Pickup reel Operating speeds
6-70 rpm
Side belts (variable) Operating speed
1-3.5 m/s, 3.3-11.5 fps
Operating speed Center Belt Speed
211 m/min, 692 fpm
Operating speed Low-Speed Center Belt (Fixed)
4.2 m/s, 13.8 fps
Operating speed High-Speed Center Belt (Fixed)
5.1 m/s, 16.7 fps
Draper belts Center belt reverse
Base
Feed drum Number of fingers
21
Feed drum Auger finger platform
Triple chevron, retracting
Feed drum Drum/auger reverse
Base
Feed drum Operating speed Low speed:
200 rpm
Feed drum Operating High speed:
240 rpm
Feed drum Center cleanout door
Base
Header height sensing on the ground
Base
Approximate weight
3447 kg (7600 lb)
Center feed belt Low speed
1000rpm
Center feed belt High speed
1200rpm
Feed drum torque RDF
1217 lb-ft (1650 Nm)
Center belt width RDF
70 in (177.8 cm )
Feed drum torque HDR
2109.4 lb-ft (2860 Nm)
Center belt width HDR
79.1 in (200.9 cm )
Pickup reel Number of slats
Base: six bat poly Optional: steel tine
Pickup reel Fingers
Base: nylon Optional: steel
Header height sensing off the ground
Optional: three sensors
Pickup reel Height control
Hydraulic
Pickup reel Speed control
Hydraulic
Draper belts Speed control
Hydraulic from cab (side belts only)
Header height sensing Type
Electrohydraulic
Quick Enquiry
Harvesters John Deere Machines for Sale Flagstaff
Find this John Deere RDF30 at Flagstaff Equipment