Description
John Deere HDF35
Specifications
Manufacturer
John Deere
Model
HDF35
Year
2026
Category
Harvesters
Subcategory
Draper Platforms
Cutterbar Length
10.7 m 35 ft
Cutterbar Knife drive Double-cut, dual-drive, shaft-driven cutterbar:
10.2 cm 4 in
Cutterbar Base skid shoe height
3.8 cm 1.5 in
Pickup reel Diameter
106.7 cm 42 in
Pickup reel Reel lift Off the cutterbar:
100.6 cm 39.6 in
Pickup reel Reel fore and aft Fore of the cutterbar:
26.4 cm 10.4 in
Draper belts Width Side belts
4.4 m 14.3 ft
Draper belts Width Center belts
200 cm 79 in
Draper belts Belt depth
100 cm 39.8 in
Draper belts Cleat height Cross belt cleat height:
19 mm 0.75 in
Feed drum Diameter
40.6 cm 16 in
Feed drum fingers Heavy-duty and round with breakaway notch and retainer Diameter:
16 mm 0.625 in
Feed drum Finger reach
152 mm 6 in
Top auger Size Diameter:
43.2 cm 17 in
Platform length
11.5 m 37.8 ft
Overall operating depth With dividers:
3.2 m 10.6 ft
Platform Type
Hinged frame flexible cutterbar
Cutterbar Type
Straight-line knife drive system
S-Series Combine Knife speed
490 cycles/min
X Series Combine Knife speed
520 cycles/min
Pickup reel Reel resume
Base
Pickup reel Reel reverse
Base
Pickup reel Operating speeds
8-70 rpm
Draper belts Center belt reverse
Base
Feed drum Number of fingers
18
Feed drum Auger finger platform
Triple chevron, retracting
Feed drum Drum/auger reverse
Base
Feed drum Operating speed Low speed:
200 rpm
Feed drum Operating High speed:
240 rpm
Feed drum Center cleanout door
Base
Header height sensing on the ground
Base
Header height sensing off the ground
Base
Pickup reel Number of slats
Base: six bat poly Optional: steel tine
Pickup reel Height control
Hydraulic
Pickup reel Speed control
Hydraulic
Draper belts Speed control
Hydraulic from cab (side belts only)
Header height sensing Type
Electrohydraulic
Top auger Type Optional: hydraulic drive
250-350 rpm
Quick Enquiry
Harvesters John Deere Machines for Sale Flagstaff
Find this John Deere HDF35 at Flagstaff Equipment