Description
John Deere F8 100
Specifications
Manufacturer
John Deere
Model
F8 100
Year
2026
Category
Harvesters
Subcategory
Self-Propelled Forage Harvesters
Engine
John Deere JD14X G136
Engine Type
Inline 6-cylinder, wet liners, valve-in-head, turbocharged, air-to-air intercooled
Engine Power (ECE R120) kW (PS) (hp)
313 kW (425 PS) (420 hp)
Displacement
13.5 l (827 in³)
Cylinder Bore
132 mm (5.20 in)
Cylinder Stroke
165 mm (6.50 in)
Rated Engine RPM
2000 rpm
Fuel System
High-pressure common rail fuel system
DEF Tank (Final Tier 4/Stage V engine)
151 l (39.9 gal)
Engine Cooling Fan Drive
Fixed fan drive
Engine Cooling Screen Cleaning System
Rotary radiator screen with active suction blower
Turbocharger
Single-stage turbo (SST)
Exhaust Emission Regulation Compliance
Final Tier 4/Stage V (Tier 3/Stufe III A)
Exhaust Emission Regulation
DOC+DPF+SCR (Stage V), DOC+SCR (Final Tier 4), No Exhaust aftertreatment (Tier 3/Stufe III A)
Maintenance Interval
500h
Lubrication
Standard: Central Greasing System
Main Clutch
Hydraulically operated dry-type disk clutch with 2 clutch disks
Main Drive Belt
5 grooves
Main Clutch Start
Hydraulic
Transmission
Two-speed transmission (ProDrive™ 25kft) & (ProDrive™)
Maximum Travel Speeds
20 km/h (12.5 mph) in field mode, 40 km/h (24.8 mph) in road mode
Brakes
Electro-hydraulically operated wet disk-type
Rear Axle
Medium-duty (8.5 t) two-wheel drive
Alternators
12 V, 90 - 200 A
Battery
2x 154 Ah (in parallel)
Corn Headers
6, 8, 10 or 12 row (4.5 m, 6.0 m, 7.5 m or 9.0 m working width)
Feedroll Frame Opening
Swing away, 37-45 degree (angle) / V-Opening
Number of Feedrolls
Four
Number of Knives
40 – 48 – 56 – 64
Knife Types Available (Crop Type)
Straight (grass / universal), Curved (corn)
Sharpening Startup
Remote from cab
Sharpening Modes
Grinding and finishing
Kernel Processor Type
Ultimate™ KP, XStream™ KP
Quick Removal KP System
Crane with remote controlled electric hoist
Ultimate250™ Lubrication
Grease
Ultimate250™ Corn, Duraline Sawtooth
115/150 or 150/150
Ultimate250™ Corn, Dura Line™ XCut
115/150
XStream305™ Lubrication
Pressurized oil
XStream305™ Speed Differential
40% or 50%, 50% standard on Small Grain KP
XStream305™ Corn, Duraline Sawtooth
150/180 or 180/200
XStream305™ Corn, Duraline Xcut
150/180
Small Grains KP
Toothcount N/A (used for sorghum, milo, etc)
Number of Paddles
10
Speed
1890 rpm
Wide Stance/Over 3.5 m (11.5 ft)
710/70 R42, 800/70 R38, 900/60 R42, Duals 520/85 R46
Rear Tires
620/70 R30, 650/60 R34, 710/60 R30, 750/65 R26
Touchscreen Display
GS Command Center
Touchscreen Display (Optional)
GS Plus Command Center
Secondary Display (Optional)
GS Plus Extended Monitor
Radio
AM/FM Basic with Bluetooth®
Radio Optional
6.5" Touchscreen AppRadio
Yield Monitoring Optional
Harvest Monitor™
Documentation Optional
Harvest Doc™
Crop Analysis
Optional with HarvestLab™
Cutting Length Adjustment
AutoLoc™ optional with HarvestLab™
Guidance Optional
AutoTrac™, Manual RowSense™, AutoTrac™ RowSense™, Machine Sync
Gras-Pickups (Transport Width)
3.0 m, 3.49 m, 4.0 m, 4.5 m, 4.6 m
Crop Flow Channel Width
660 mm
Cutterhead (width/diameter)
680 mm / 670 mm
40-knife Cutterhead
7-26 mm LOC in 1 mm steps/ 1,100 rpm
48-knife Cutterhead
6-22 mm LOC in 1 mm steps/ 1,100 rpm
56-knife Cutterhead
5-19 mm LOC in 1 mm steps/ 1,100 rpm
64-knife Cutterhead
4-17 mm LOC in 1 mm steps/ 1,200 rpm
Ultimate250™ Roll Diameter
250mm
XStream305™ Roll Diameter
305 mm
Rotor Diameter/House Width
620 mm / 560 mm
Working Height (Maximum)
6.60 m
Machine Width 3.3 m (10.8 ft)
800/70 R38
Machine Width 3.5 m (11.5 ft)
900/60 R42
Transport Length (without header)
6.87 m (22 ft 6.3 in)
Transport Height (to cab roof)
3.93 m (9 ft 10.1 in)
Reach from Center Line
6 or 8 row - 4.73 m (15.5 ft), 10 row - 5.87 m (19.3 ft), 12 row - 6.71 m (22 ft)
Quick Enquiry
Harvesters John Deere Machines for Sale Flagstaff
Find this John Deere F8 100 at Flagstaff Equipment