Description
John Deere 8900A PrecisionCut™
Specifications
Manufacturer
John Deere
Model
8900A PrecisionCut™
Year
2026
Category
Mowers
Subcategory
Fairway Mowers
Vehicle Drive pump
Tandem gear pump
Vehicle Hydraulic system capacity
37.8 L10 U S gal
Vehicle Fuel tank capacity
60.6 L16 U S gal
Vehicle Front drive tires
26.5x14-12 turf
Vehicle Steering tires
20x12X10-8 turf
Controls Throttle
Automatic controls with AutoPedal foot controls; manual control through TechControl display
Controls Forward/reverse
2-pedal
Controls Mower lift
One-touch single handle
Controls Parking brake
Electric Switch on Command Arm for Internal Wet Disk Brakes
Controls Seat
Air Ride suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
Controls PTO
Electric Switch on Command Arm
Controls Ignition
Key start
Controls Tilt steering
Left Foot operated for easy adjustment
Controls Operator display
TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Ground speed
Mowing0-12.8 km/h0-8.0 mphTransport19.2 km/h12 mphReverse9.6 km/h6 mph
Cutting Units Number
Five
Cutting Units Bedknife adjustment
Reel to bedknife
Sound levels Measuring standard
ISO 11201
Sound levels Attachments installed
FTCs, reels engaged
Fuel Economy Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality
25% load: 3.63 L/hr0.96 gph40% load: 5.64 L/hr1.49 gph50% load: 6.85 L/hr1.81 gph
Certification Type
ANSI B71.4-2012
Engine Type
Direct Inject Turbocharged Diesel
Engine Compliant emission regulation
United States and Canada Tier 4
Engine Horsepower
Maximum rated horsepowerAt 2800 rpm ISOC: 41.1 kW55.1 hp
Engine Cylinders
Four
Engine Displacement
2.091 L127.6 cu in
Engine Air cleaner
2-stage dry element
Engine Fuel
Diesel up to B20 compliant
Engine Cooling system
Liquid centrifugal pump; forward machine location for optimum cooling
Vehicle Cutting units drive
Hydraulic motor to each cutting unit
Vehicle Steering
Hydraulic power with double acting steering cylinder
Vehicle Ground pressure
83 kPa12 psi
Vehicle Brakes
Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
Operating weight Cutting units lowered
Full fluids; no operator Quick Adjust QA7 (with 66 cm / 26 in ) cutting units lowered: 1239 kg Full fluids; no operator Quick Adjust QA7 (with 66 cm / 26 in ) cutting units lowered: 2725 lbFull fluids; no operator Quick Adjust QA7 (with 76 cm / 30 in ) cutting units lowered: 1270 kg Full fluids; no operator Quick Adjust QA7 (with 76 cm / 30 in ) cutting units lowered: 2795 lb
Controls Storage
Cup holder; two-way radio located in Command Arm; large operator storage located on left hand side of operator station
Height with ROPS
2200 mm87 in
Length
2825 mm111 in
Transport width
Quick Adjust QA7 (with 66 cm / 26 in ): 2194 mmQuick Adjust QA7 (with 66 cm / 26 in ): 86.38 in Quick Adjust QA7 (with 76 cm / 30 in ): 2385 mmQuick Adjust QA7 (with 76 cm / 30 in ): 93.90 in
Mowing position width
QA7 (66 cm / 26 in ) 3275 mmQA7 (66 cm / 26 in ) 129 in QA7 (76 cm / 30 in ) 3695 mmQA7 (76 cm / 30 in ) 145 in
Wheelbase
1585 mm62.4 in
Cutting Units Size
Quick Adjust QA7: 66 or 76 cm Quick Adjust QA7: 26 or 30 in
Cutting Units Total width of cut
289.5 or 330.2 cm 114 or 130 in
Cutting Units Height of cut
QA7: 6.3-50.8 mmQA7: 0.25-2.0 in
Cutting Units Frequency of clip (FOC Reels) OR Blade tip speed (decks)
RollersFront and rear: 76.2 mmFront and rear: 3 in 10 Blade: 1.06 mm/km/h10 Blade: 0.067 in /mph8 Blade: 1.33 mm/km/h8 Blade: 0.084 in /mph
Cutting Units Reel diameter
17.8 cm 7 in
Quick Enquiry
Mowers John Deere Machines for Sale Flagstaff
Find this John Deere 8900A PrecisionCut™ at Flagstaff Equipment