Description
John Deere Z975M EFI
Specifications
Manufacturer
John Deere
Model
Z975M Efi
Year
2026
Category
Mowers
Subcategory
Zero Turn Mowers
Fuel system Fuel type
Gasoline
Fuel system Fuel consumption
Under normal conditions, load, operation, and dependent on loads and operating conditions 7 Iron PRO side-discharge: 1.4 U S gal/hr 5.3 L/hr FastBack PRO rear-discharge: 1.3 U S gal/hr 4.9 L/hr
Fuel system Fuel tank capacity
11.5 U S gal 43.5 L
Electrical system Charge system
20 amp
Electrical system Battery voltage
12 V
Electrical system Cold cranking amp
300 amp
Electrical system Hour meter
Display panel including hour meter, fuel level, engine speed, system voltage, low engine oil pressure indicator, starting interlock indicators (PTO, operator presence, park brake), caution warning, stop warning, and on-board diagnostics
Electrical system Operator presence starting system
Brake-N-Go (hand)
Drivetrain Transmission
Hydrostatic
Drivetrain Wheel motors
Tuff Torq heavy-duty integrated piston wheel motor with cross porting
Drivetrain Travel speed
Speed range 0-12 mph 0-19.3 km/h Forward 0-12 mph 0-19.3 km/h Reverse 0-4.5 mph0-7.2 km/h
Drivetrain Speed and direction control
Twin levers
Drivetrain Hydraulic capacity
5.9 U S qt 5.6 L
Drivetrain Filter
Internal, replaceable
Tires Drive wheels
24x12-12
Tires Load rating
4 PR
Brakes Dynamic braking
Twin levers
Brakes Park brake actuation
Hand brake
PTO Type
Electro-magnetic, 250 lb-ft 339 Nm
PTO Drive
V-belt
Mower decks Size
60-in (152-cm ) 7Iron™ PRO side-discharge72-in (183-cm ) 7Iron™ PRO side-discharge60-in (152-cm ) 7Iron™ PRO Mulch On Demand™60-in (152-cm ) FastBack™ PRO rear-discharge72-in (183-cm ) FastBack™ PRO rear-discharge
Mower decks Deck construction
7-Iron™ PRO: 7-gauge, 0.179-in (4.6-mm) one-piece forged steel FastBack™ PRO: 7-gauge, 0.179-in (4.6-mm) fabricated steel
Blades Length
Varies by deck size
Blades Blade tip speed
7Iron PRO: Approximately 18,500 fpm60-in (152-cm ) FastBack: Approximately 16,500 fpm72-in (183-cm ) FastBack: Approximately 18,000 fpm
Blades Number
Three
Wheels Caster wheel type
Flat free
Wheels Caster wheels
13x6.5-6
Wheels Front anti-scalp rollers
Left, center, right
Wheels Rear anti-scalp rollers
7Iron PRO: Left, center, right FastBack PRO: Left, right
Dimensions Weight
1426 to 1523 lb 647 to 691 kg
Operation Slope operating limit
20 degrees (10 degrees with material collection system installed)
Engine Manufacturer/Model
61A7 EFI
Engine Power
Gross at 3,600 rpm37 hp27.6 kW
Engine Displacement
60.6 cu in 993 cc
Engine Cylinders
Two
Engine Crankcase capacity
With filter, 2.5 U S qt2.4 L
Engine Oil filter
Full flow, replaceable
Engine Lubrication
Full pressure
Engine Cooling
Forced air, with integrated clean out ports and oil cooler
Brakes Park brake
Internal wet disk integrated in the transmission
Mower decks Height-of-cut range
Increments 0.25 in 0.64 cm 1-5.5 in 2.54-14 cm
Mower decks Cutting width
60,72 in 152, 183 cm
Blades Thickness
7Iron PRO: 0.25 in 6.4 mm FastBack PRO: 0.31 in 8 mm
Dimensions Length
60-in deck: 87 in 21 cm 72-in deck: 90229 cm
Dimensions Width
With chute down, 74, 86 in 188, 218 cm Rear discharge, 63.5, 75.8 in 161.3, 192.5 cm
Dimensions Height
With ROPS up, 73 in 185 cm With ROPS down, 47 in119 cm
Quick Enquiry
Mowers John Deere Machines for Sale Flagstaff
Find this John Deere Z975M Efi at Flagstaff Equipment